Our Complementary Partners at vermeer southeast stores

Our range of partners are sure to provide you and your business with exactly what you need to get the job done. Please review available options from our complementary equipment by selecting the appropriate application below.



DCI revolutionized the HDD industry with the introduction of the DigiTrak Locating system in 1991. The unique features of the new system provided greater accuracy for measuring the depth and location of the drillhead than prior systems.


Built by those in the field for others in the field, our products play a key role in helping you collect the data you need to prevent damage and provide insight. Whether you are locating utilities, beginning a construction project, conducting an archaeological survey or geophysical analysis, you can trust US Radar systems to go the distance with you.


A major challenge of today’s bore plans is that they often become irrelevant a few rods in.
The TeraTrak™ R1 generates continuous job site topography and gives you the vital data to create and update your bore plan on-the-fly, so it never becomes obsolete.

  • Visualize underground hazards
  • Target waypoints to drill with more confidence
  • Rugged, reliable and waterproof hardware
  • Rugged, waterproof design with IP66 rating
  • Does the math for you
  • Fewer re-drills; no bent rods
  • Faster bores and cost saving
innovated by the field, for the field

The Quantum Imager is the first true triple frequency range GPR system ever produced. Because the antenna emits three separate signals simultaneously, the user can survey significantly greater depths with higher resolution than any other locating technology without sacrificing middle frequencies which are ideal for locating targets like buried utilities. Stepped ultra wideband pulses combine the advantages of pulse radar and stepped frequency radar for unsurpassed resolution and depth. New direct RF sampling technology creates clearer, easier to understand images than previously possible with older radar technologies. All these components work together to make locating easier while providing superior results.

  • Stepped Pulse Multi-Frequency GPR
  • SmartGain2
  • Folding Rough Terrain Cart
  • Self-Calibrating
  • SmartStack
  • StreetSmart Real-Time Processing
  • Auto Config
  • Depth Calibration

Vermeer provides a comprehensive suite of McLaughlin, Vacuum X-Traction, Inc. and Vac-Tron series vacuum excavation technology and equipment training and support, as well as the XR2 vacuum excavator, a brand-new innovation that incorporates the traditional soft digging method of vacuum excavation with the separation technology of a reclaimer.

Working under one leadership team allows us to leverage the innovation, market expertise and production capabilities across brands to meet increasing demand. It also provides you a more efficient, single-point connection to a full vac product lineup.

Today, more than ever, the ability to make a big impact with a small footprint is critical. Trenchless expertise has never been in higher demand, and Vermeer is the powerhouse in vacuum excavation technology and equipment.

From skid to trailer to truck-mounted vacuum excavators, Vermeer has you covered.

The core saw is built on a portable, compact trailer measuring 13-in (348-cm) long and 69-in (175-cm) wide for ease of jobsite access and can be towed with a half-ton pickup truck. Core sawing creates minimal disruption to traffic, minimal manual labor and preserves the road integrity when compared to saw cutting. The CS418B features an onboard water tank to cool the saw bit and can be efficiently moved into position with the telescoping and pivoting arm.

Contractors face congested underground conditions, unmarked utilities and increasingly strict regulations, making accurate and timely locating more important than ever. The Verifier G3 has a durable design with antennas mounted in rubber isolators to stand up to the toughest jobsite conditions.

From skid to trailer to truck-mounted hydro-excavators, Vermeer has you covered.

The Vermeer XR2 vacuum excavator is a brand-new innovation that incorporates the traditional soft digging method of vacuum excavation with the separation technology of a reclaimer.

Vermeer MV Solutions offers McLaughlin and Vac-Tron series product lines, featuring vacuum excavation technology, equipment, training and support to the growing underground utility and soft dig markets.



McLaughlin, a Vermeer Company, is a leading manufacturer of trenchless construction equipment including Vermeer vacuum excavators, auger boring machines, pneumatic piercing tools, locators, directional drills and attachments. Ross with support the full line of McLaughlin products for dealers and contractor.


The McLaughlin McL-12HB is a 3”-10” zipper auger boring machine provides a versatile and economic solution to install steel and PVC casing as well as providing the ability to be used in a free boring application.

  • Easy set-up: The short carriage of the McL-12HB enables setup in trenches only 7’ in length using 4’ auger flight for free bore applications and case bore using 10’ sections of pipe (Steel or PVC) with a 13’ track.
  • Power Source: With remote hydraulic quick disconnects, the McL-12HB can be powered with a backhoe, mini excavator or power pack.
  • Reliable Design: Foot-actuated, spring-loaded dog plate provides a simple and reliable method for quickly securing and retracting dog pins.
  • Ready to Work: Powerful hydraulic motor generates 1030 ft-lb torque @ 2500 psi tough boring conditions.
  • Designed for Precision: The in-line dual hydraulic cylinder design allows for maximum thrust of 24,500 lbs at 2500 psi on the bore centerline ensuring thrust is delivered in-line with the auger carriage and features a casing pusher for up to 10” diameter sections of pipe. 
  • Controlled Installations: Variable speed hydraulic valve provides up to 120 rpm auger speed @ 20 gpm for controlled boring installations.

Mincon Hardrock Hammer Systems utilize “High Frequency Cycle” technology. Mincon Hardrock is the only manufacturer of Steerable Hammers that incorporate this feature. The advantages to this are as follows.High Frequency design aids in faster removal of drill cuttings from the bit face while providing the smallest possible chip size. This aids in keeping the borehole cleaner and reduces the possibility of getting the tool stuck. High Frequency design improves the steering capabilities of the tool. In head to heads tests against other competitor manufacturers the Mincon Hardrock systems out steered them in dirt, cobble and solid rock.High Frequency design provides less vibration to the drill string. 


Every Mincon DTH hammer is built in-house, at our state-of-the-art factories. All components are precision-manufactured using high-quality raw materials and undergo proprietary heat-treatment processes at our own facilities to guarantee durability and quality.
Mincon’s DTH hammer models support a wide variety of popular drill bit shank designs and are available with all common backhead connections. API Reg pin connectors are standard.

  • Patented innovation to ensure maximum energy transfer
  • Simplified design for easier servicing and higher reliability
  • Valveless, high-frequency design for smoother operation
  • Multi-start threads on backhead and chuck for easy coupling/uncoupling
  • Unique internal mount system eliminates the need for wear shims and special assembly tools
  • Specialised heat-treatment hardening for critical components for maximum longevity

We like this industry. We like the people. When you’ve got that going for you, the work becomes more about the relationships you make and taking good care of your customer. We started Right Turn Supply to do just that. We find the best items in the marketplace. We deliver them with honest information and service at the highest level – the whole enchilada. If you want the longer version of the story, pull up a chair and we’ll tell it.

  • No Dust
  • No Sand Content
  • Extends Pump Life
  • Environmentally Friendly
  • Extends Trasmitter Life
  • Longer Tooling Life
  • Easy to Mix
  • Higher Concentration = Smaller Footprint
  • Higher Production Rates

This one of a kind HDD utility drilling fluid has yet to meet a job it can’t handle. Cobble Commander increases the drilling fluid’s ability to carry out cuttings without drastically affecting the viscosity. This is indicated by high-yield point and low plastic viscosity readings. When not circulating, the mud instantly returns to a gelled state and immediately suspends drilled cuttings. At the end of the day, Cobble Commander will allow for more time efficient drilling and the carrying out of more cuttings, proving the efficiency and quality of the formula.

  • Increase rate of penetration
  • Excellent cuttings transport
  • Excellent cuttings suspension
  • Bore hole stabilization through “gel locking” in the formation
  • To be used with bentonite
  • A must for any dual-rod machine
  • Compatible with PAC’s, TROL’s, lubricants, detergents, PHPA, etc.
  • Recommended for rock, sand, gravel, and cobble formations
  • Increases the drilling mud’s ability to carry out cuttings without drastically raising the viscosity

GEL/BENTONITE drilling fluid systems improve your drilling performance, the technology maximizes production, and environmental solutions to safely manage waste volumes. Specialized additives complement the efficiencies of our advanced drilling fluid systems by targeting performance-hindering downhole conditions, eliminating or minimizing the problems that drive up costs and threaten drilling programs. For example, we were the first to introduce cost-effective, high-efficiency micronized barite technology to water- and oil-based drilling fluids.

Innovative drilling fluid engineers are at the company’s core, helping oil and gas operators increase efficiency and lower costs. We do this by developing drilling fluid systems and additives that accommodate a wide range of drilling environments and demanding applications—including:

utility plows


Bron has been designing, manufacturing and marketing heavy equipment and attachments since 1974. BRON products are sold through dealers around the world and include: static and vibratory utility plows, agricultural drainage plows, hydraulic towed scrapers, pipelayers, cable removal plows, rubber track undercarriages, and RTU ejector boxes. BRON products are designed for extra-strength and durability. Field tested in hundreds of installations around the world, the BRON products are ideal for those tough working conditions.

The BRON 175 is a compact Utility Tractor used for gas and utility installations. Engineered for power and performance, the BRON 175 is designed to allow contractors to work on any terrain, maneuver in tight areas, and perform actively in all soil conditions. The BRON 175 comes with variable vibration for optimal performance in tough ground conditions along with an 8,000 lb. capacity reel carrier.

  • Decelerator Pedal: The decelerator pedal offers the option to change into operating ranges best suited for specific applications. Allows full hydraulic flow to the plow when slower travel speeds are required.
  • Reel Carrier: The 8,000 lb Reel Carrier can carry two spools of product for ease of installation.
  • Seat Mounted Controls: Seat Mounted Plow and Tractor controls gives the operator ease of tractor and plow operation with minimal fatigue.
  • Fairleads & Slider Chute: Fairleads install on the roof and a blade mounted slider chute keep cables in line organized and ready for installation. 
  • ROPS Canopy: Roll over protections structure (ROPS Certified) is standard equipment on the BRON 175. This fully certified canopy protects the operator.
  • V75-3 Vibratory Plow: Ideal for installations where tractive power is limited. This offsetting vibratory plow is designed for the installation of fibre optics, copper cable, conduit & pipe.

Whether you are looking for arborist supplies, arbor equipment, arboriculture gear, or arborist gear, SHERRILLtree is one of the largest arborist equipment suppliers and your one-stop shop for arborist supplies


We see tree care as much more than just a job. It's a lifestyle.

Any arborist who loves to climb could go on and on about their passion. Like trees, there’s always more, and every once in a while, you come across something new and different. Our mission focuses on education and constant professional improvement. Whether it’s a different technique, an interesting perspective, new gear, or something else, we do our best to provide you even more to explore – starting right here.

Yanmar Mini Compact

Since introducing the world’s first mini-excavator in 1968, we’ve been a leader in compact equipment. Each one of our machines is put through rigorous testing to ensure that they possess that legendary YANMAR quality that turns even your hardest job into an easy one. Our eight excavators, six with true zero tail swing, were designed to overcome challenging conditions without sacrificing any of the larger-than-life power that you need to get the job done. But don’t let all that gritty diesel power get your worried, we don’t believe in gas-guzzling.


Power, flexibility and stability in a compact package. Redefining the definition of compact power, the Yanmar SV40 is pushing the limits on an excavator of its size. With best in class power, digging force and lifting Capacity , this machine is a game changer within the compact excavator segment.Available in cab and canopy models, the SV40 is one of the most rugged, flexible machines; built to work effectively in extremely tight spaces other bulkier excavators simply can’t reach. Options for the SV40 include a second PTO function, 4 or 6-way blade and an additional counterweight, so the SV40 has everything for you to get the job done.


For over 30 years, FECON has built a reputation of manufacturing the most durable mulching head on the market. Their heavy-duty, rugged products power through the job, start to finish. Whether you are buying, renting, or servicing your mulching equipment, FECON has solutions that focus on your success.


This low-ground pressure (3.9 psi) tractor features an oscillating carriage with 30” track shoes, providing balanced traction in hard or soft conditions. A spacious cab features air suspension, heated seat, new larger touchscreen IQAN display, and keyless ignition with security for operator comfort and control. A tilting cab and wide engine compartment doors on the side and read, simplify access for maintenance and service. The 325VST also features the Fecon Power Management System for unrivaled power and performance in the 300HP class.

Cable Utility Trailers

Trailer solutions for the power and fiber optic industry professionals.

While the overall design and unique features of the Larson Cable Trailer are patented, the trailers non-captive parts are universally available – simplifying routine maintenance and repair. Most moving parts may be obtained at your local parts or hardware stores. All hoses have a 3,000psi capability and have standard JIC fittings, which can be purchased anywhere hoses and fittings are sold.

Heavy Haul Trailers

Trailers for all of your hauling needs, from hauling smaller equipment to large heavy hauls.

Our company brings over 30 years of design and manufacturing experience to each project. We specialize in custom designing units to meet our customers’ individual requirements.

At Felling Trailers, we having been providing Innovative Solutions to your specialized transport needs for over 45 years. With over 100 years combined industry sales experience, we have the answers to your transport needs.

Butler Trailer has been servicing the utility & construction industries proudly since 1968. Our goal is to build you a top quality trailer to fit your needs. We offer a full line of Pole trailers, Cable trailers and Equipment Transport trailers.