BC900XL Brush Chipper
- Enhanced chipping capabilities
- Optimal access to key machine maintenance areas
- Safety features built with the operator in mind
General
| Manufacturer | Vermeer |
| Model | BC900XL Brush Chipper |
| Category | Landscape, Rental, Tree Care |
| Price | Request a Quote |
| Year | 2024 |
Engine - Option one
| Oil Filter | Spin-On |
| Make and Model | Briggs and Stratton Vanguard |
| Clutch Drive Engagement | Clutchless PTO |
| Gross Horsepower (Maximum) | 35hp (26.1kw) |
| Cooling Medium | Air |
| Max Fuel Consumption | 3.2gph (12.1lph) |
| Fuel Tank Capacity | 16gal (60.6L) |
| Torque (Max) | 53ft-lb (71.9Nm) |
| Alternator | 20 amp |
| Recommended Oil | 10W30 |
| Air Cleaner | Engine-mounted |
| Oil Volume with Filter | 2.9qt (2.7L) |
| Fuel Type | Gasoline |
Feed System
| Number of Knives | 12 |
| Feed Roller Dimension | 15.8" dia x 13.5" long (40 cm x 34.3 cm) |
| Motor Manufacturer | White |
| Number of Feed Roller Motors | 1 |
| Feed Roller Orientation | Horizontal |
| Number of Feed Rollers | 1 |
| Feed Roller Clamp Type | Spring/weight |
| Pinch Point - Distance to End of Feed Table | 65in (165.1cm) |
| Motor Displacement | 33.1 CID |
| Infeed Hopper Height | 32in (81.3cm) |
| Weight of Feed Roller | 210lbs (95.3kg) |
| Infeed Table Length | 26in (66cm) |
| Infeed Throat Capacity | 9 in x 14 in (22.9 cm x 35.6 cm) |
| Feed Speed | 140ft/min |
| Infeed Table Width | 48in (121.9cm) |
| Infeed Table Material Thickness | .2in (.5cm) |
| Distance from Feed Table to Ground | 29in (73.7cm) |
| Feed Roller Clamp Load | 560lbs (254kg) |
General Dimensions and Weights
| Tongue Weight - Engine Option One | 320lbs (145.1kg) |
| Length - Table Down, Tongue Extended | 154.8in (393.2cm) |
| Weight - Engine Option One | 3060lbs (1388kg) |
| Height | 97in (246.4cm) |
| Width | 79.5in (201.9cm) |
| Length - Feed Table Up, Tongue In | 140.4in (356.6cm) |
Drum/Disc Cutting System
| Bedknife - Number of Useable Edges | 2 |
| Bedknife Size | 5" x 12.1" (12.7 cm x 30.7 cm) horizontal and 5" x 8.8" (12.7 cm x 22.4 cm) vertical |
| Weight With Shaft | 330lbs (149.7kg) |
| Air Flow | 3925cfm |
| Thickness | 1in (2.5cm) |
| Diameter | 33in (83.8cm) |
| Fixture Method | Bolt-on |
| Number of Paddles | 2 |
| Number of Knives | 2 |
| Knife Size | 5" x 11.75" (12.7 cm x 29.8 cm) |
| Safety Lock - Number of Positions | 6 |
| Speed | 1500 rpm |
| Replaceable Threaded Knife Block | Yes |
| Number of Bolts/Knife | 5 |
| Useable Edges | 2 |
| Bedknife Thickness | .8in (1.9cm) |
| Bedknife Material | Grade 50 |
| Material Capacity | 9in (22.9cm) |
| Knife Thickness | .6in (1.6cm) |
| Material | A8 chipper steel |
Safety System
| Four Position Feed Control Bar | Standard |
| Bottom Feed Stop Bar | Standard |
| Green Hold to Run Button | Standard |
| Reset Method | Dual green hold-to-run buttons |
| Diameter | 2in (5.1cm) |
| Reduced Sensitivity | 12deg |
| Normal Sensitivity | 22deg |
| Actuation Force (BFSB) | 34lbs (15.4kg) |
| Bottom Feed Stop Bar Diameter | 2in (5.1cm) |
| Material Thickness | .1in (.3cm) |
| Positions | Four positions: Emergency stop, forward, stop and reverse |
| Bottom Feed Stop Bar Material Thickness | 11 GA |
Other Options
| Special Paint | Yes |
| Extended Warranty | Yes |
| Preventive Maintenance | Yes |
Cutter Drive Components - Engine Option One
| Manufacturer | Linkbelt |
| Dynamic Capacity | 31400lbs (14242.8kg) |
| Belt Idler/Tensioner | Yes |
| Belt Type | Chipper - Polyester Cord with wrap |
| Bore | 2.2in (5.6cm) |
| Type | Dual spherical roller |
| Number of Bearings | 2 |
| Static Capacity | 53500lbs (24267.2kg) |
Hydraulic System
| Filtration Method | 10 micron return |
| Auto Reverse PSI | 2300psi (158.6bar) |
| System relief pressure | 2500psi (172.4bar) |
| Tank capacity | 6.8gal (25.7L) |
| Recommended Oil Type | Vermeer VMF Gold |
| System Type | Tandem Center |
| Pump Flow at Maximum RPM | 5gpm (18.9L/min) |
Electrical System
| Battery | Group 24 - 580 CCA |
| Standard Gauges | Hour meter |
| System Voltage | 12 V |
| Controller | Vermeer ACS |
| Shutdown System | Engine |
Chassis
| Fender Description | Bolt-on |
| Hitch Type | Pintle or ball |
| Frame Description | 3/16 in. x 5-5/8 in. (.5 cm x 14.3 cm) |
| Tongue Description | 3" x 5" 3/16" (7.6 cm x 12.7 cm x .5 cm) Tube |
| Manufacturer - Option Two | Dexter |
| Axle/Suspension - Option Two | 3500 lb (1587.6 kg) with electric brakes |
| Tires - Option One | ST215/75R14 |
| Axle/Suspension | 3500 lb (1587.6 kg) |
| Capacity - Option One | 3500 (1587.6 kg) |
| Manufacturer - Option One | Dexter |
| Type - Option One | Rubber torsional |
| Wheels - Option One | 14" (35.6 cm) |
| Type - Option Two | Rubber torsional |
Discharge System
| Rotation Type | Manual dual handles with pin lock |
| Rotational Lock | Yes |
| Chute Rotation Angle | 270deg |
| Deflector Thickness | .1in (.3cm) |
| Chute Height | 96.7in (245.6cm) |
| Side Wall Thickness | .1in (.3cm) |
| Bottom Thickness | .1in (.2cm) |
| Top Thickness | .1in (.3cm) |